12315 Revital Base Fiber 7.2ml

Revital Base Fiber – version without colored gel polish

1. Gently buff the nail with a polishing block, wipe away any dust, and then degrease the nail with Nail Cleaner.
2. Apply to the prepared nail plate examples*, then apply a thin layer Revital Base Fiber Apply a coat and cure it under an LED/UV lamp for the time specified in the table.
3. Apply a second, slightly thicker layer to the natural nail and to the nail form if you are extending the nails. Cure under an LED/UV lamp according to the chart. To create the correct nail architecture, repeat the process as needed.
4. After polymerization, carefully remove the template and smooth the nails with 180 grit seam. Remove any dust that has accumulated, and then wipe your nails with Nail Cleaner a damp, lint-free cloth.
5. Finally, apply a thin layer Top Hard Apply a coat and cure it under an LED/UV lamp according to the table. After curing, remove the tacky layer with Nail Cleaner.
6. To remove material from your nails, first buff off the shiny top layer with a buffing block, and then use acetone or a nail drill.
   

* It is recommended to use a primer suitable for your specific type of nail plate.

Revital Base Fiber – version with colored gel polish application

1. Gently buff the nail with a polishing block, wipe away any dust, and then degrease the nail with Nail Cleaner.
2. Apply to the prepared nail plate examples*, then apply a thin layer Revital Base Fiber Apply a coat and cure it under an LED/UV lamp for the time specified in the table.
3. Apply a second, slightly thicker layer to the natural nail and to the nail form if you are extending the nails. Cure under an LED/UV lamp according to the chart. To create the correct nail architecture, repeat the process as needed.
4. After polymerization, carefully remove the template and smooth the nails with 180 grit seam. Remove any dust that has accumulated, and then wipe your nails with Nail Cleaner a damp, lint-free cloth.
5. Apply a coat of the selected gel polish color and cure it under an LED/UV lamp according to the table. The darker the shade, the longer the curing time. To achieve a more intense color, repeat the process.
6. Finally, apply a thin layer Top Hard Apply a coat and cure it under an LED/UV lamp according to the table. After curing, remove the tacky layer with Nail Cleaner.
7. To remove material from your nails, first buff off the shiny top layer with a buffing block, and then use acetone or a nail drill.
   

* It is recommended to use a primer suitable for your specific type of nail plate.

ATTENTION: In the case of problematic nail plates, under Revital Base Fiber It is recommended to apply Base Hard.

Removal of Revital Base Fiber

1. Use a polishing block to remove the glossy top layer of the previous coating so that Acetone UV Gel Polish Remover could get a better grasp of the material.
2. To FOIL NAIL WRAPS lay out the napkins Acetone UV Gel Polish Remover, place it on your fingernail and wrap your finger in foil.
3. After approximately 7–10 minutes Remove the gel polish base coat with a wooden stick or a metal cuticle pusher. Carefully remove any remaining residue with a fine-grit buffing block.
4. If you don't apply a new coat of gel polish, you can apply oil to your cuticles to help moisturize and condition them.

For professional use only. Please read the instructions for use carefully. Avoid contact with skin. Avoid contact with eyes. May cause an allergic reaction. Discontinue use if irritation occurs. Keep out of reach of children.

The product's ingredients (INCI) are subject to change due to regulatory changes. The current list of ingredients is always indicated on the product packaging.

Polyurethane-57, Hydroxypropyl Methacrylate, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Glycol Dimethacrylate, Silica, Nylon-66, Bis-(Methacryloyloxyethyl) Phosphate, Tocopherol, Calcium Pantothenate, PEG-9 Dimethacrylate, BHT, p-Hydroxyanisole, Hydroquinone, CI 15850, CI 77891, CI 60725

Cosmo Group Sp. z o.o.
ул. Dojazd 15
62-090 Kiekrz

znn@neonail.com